View LTM230HT01_7240535.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/35 page LTM230HT01 model product information product information issued date : 2008-06-19 application engineering part 1, hd lcd business samsung electronics co . , ltd. note : this is product information is subject to ch ange after 3 months of issuing date. samsung tft-lcd product information model : LTM230HT01 samsung tft samsung tft - - lcd product information lcd product information model : LTM230HT01 model : LTM230HT01 free datasheet http:///
2/35 page LTM230HT01 model product information product information contents general description ------------------------------- -------------------------------------------------- ( 3) 1. absolute maximum ratings ----------------------- -------------------------------------------- (4) 2. optical characteristics ------------------------ --------------------------------------------------- (6) 3. electrical characteristics --------------------- ------------------------------------------------- (1 1) 3.1 tft lcd module 3.2 back light unit 4. block diagram ---------------------------------- ------------------------------------------------- (1 6) 4.1 tft lcd module 4.2 back light unit 5. input terminal pin assignment ------------------ -------------------------------------------- (17) 5.1 input signal & power 5.2 lvds interface 5.3 back light unit 5.4 input signals, basic display colors and gray sc ale of each color 6. interface timing ------------------------------- -------------------------------------------------- ( 26) 6.1 timing parameters (de only mode) 6.2 timing diagrams of interface signal (de only mo de) 6.3 power on/off sequence 6.4 vdd power dip condition 7. outline dimension ------------------------------ ------------------------------------------------- (3 0) 8. general precaution ----------------------------- ------------------------------------------------- (3 3) 8.1 handling 8.2 storage 8.3 operation 8.4 others free datasheet http:///
3/35 page LTM230HT01 model product information product information workstation & desktop monitors display terminals for av application products monitors for industrial machine * if the module is used to other applications besid es the above, please contact sec in advance. features general description description applications general information high contrast ratio, high aperture structure tn (twisted nematic) mode wide viewing angle high speed response fhd (1920 x 1080 pixels) resolution low power consumption de (data enable) only mode lvds (low voltage differential signaling) interface (2pixel/clock) compact size design rohs, tco 03 compliance tbd power consumption mm 0.2655(h) x 0.2655(w) pixel pitch mm 509.76(h) x 286.74(v) active display area note haze 25% , hard coating (3h) surface treatment cd/ O 300(typ.) luminance of white normally white display mode rgb vertical stripe pixel arrangement pixel 1,920 x 1,080 number of pixels colors 16.7m (hi-frc) display colors unit specification items LTM230HT01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft (thin film transistor) as switching com ponents. this model is composed of a tft lcd panel, a driver circuit and a back light unit. the resolution of a 23 is 1920 x 1080 and this model can display up to 16.7 millions colors. free datasheet http:///
4/35 page LTM230HT01 model product information product information mechanical information (1) v 6.5 gnd-0.5 v dd power supply voltage v 5 - v sig data signal (4)(5) g 1.5 - v nop vibration ( non - operating ) (3)(5) g 50 - s nop shock ( non - operating ) (2) 50 0 t opr center of glass surface temperature (operation) (2) 60 -25 t stg storage temperature note unit max. min. symbol item 1. absolute maximum ratings if the condition exceeds maximum ratings, it can ca use malfunction or unrecoverable damage to the device. note (1) ta= 25 2 c note (1) mechanical tolerance is 0.5mm unless there is a special comment. 3,050 18.9 310.5 531.9 max. lcd module only g - - weight mm - - depth (d) mm 310.0 309.5 vertical (v) w/o inverter assy mm 531.4 530.9 horizontal (h) module size note unit typ. min. item free datasheet http:///
5/35 page LTM230HT01 model product information product information (2) temperature and relative humidity range are sho wn in the figure below. a. 90 % rh max. (ta 39 c) b. maximum wet-bulb temperature at 39 c or less. (ta 39 c) c. no condensation (3) 11ms, sine wave, one time for x, y, z axis (4) 10-300 hz, sweep rate 10min, 30min for x,y,z ax is (5) at vibration and shock test, the fixture which holds the module to be tested has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) fig. temperature and relative humidity range free datasheet http:///
6/35 page LTM230HT01 model product information product information 2. optical characteristics * c.g.l : color grayscale linearity (7),(8) sr-3 (6) sr-3 cd/m 2 - 300 250 y l luminance of white (center of screen) (5) rd-80s 10 5 - tr + tf on/off response time(on/off) msec normal l,r =0 u,d =0 viewing angle (9) 0.02 - - u'v' white c.g.l (acc only) - 0.468 - wv' - 0.198 - wu' white - 0.158 - bv' - 0.175 - bu' blue - 0.564 - gv' - 0.125 - gu' green - 0.523 - rv' - 0.451 - ru' red color chromaticity (cie 1976) 0.359 0.329 0.299 wy 0.343 0.313 0.283 wx white 0.090 0.060 0.030 by 0.180 0.150 0.120 bx blue 0.630 0.600 0.570 gy 0.330 0.300 0.270 gx green 0.360 0.330 0.300 ry 0.670 0.640 0.610 rx red color chromaticity (cie 1931) (3) sr-3 - 1000 600 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item the optical characteristics should be measured in a dark room or equivalent. measuring equipment : sr-3, rd-80s (topcon), ez-con trast (eldim) (ta = 25 2 c, vdd=5v, fv= 60hz, fdclk= 69.3 mhz, il = 7.5marms) free datasheet http:///
7/35 page LTM230HT01 model product information product information (4) sr-3 % 25 - - b uni brightness uniformity (9 points) k - 6500 - - color temperature % - 72 - - color gamut note unit max. typ. min. condition symbol item - 80 70 d - 80 70 u ver. - 80 70 r (8) ez- contrast degrees - 80 70 cr 10 l hor. viewing angle note (1) test equipment setup the measurement should be executed in a stable, win dless and dark room between 30min after lighting the back light at the given te mperature for stabilization of the back light. this should be measured in the c enter of screen. single lamp current : 7.5ma environment condition : ta = 25 2 c 2 sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 40 M rd-80s : 50 M field free datasheet http:///
8/35 page LTM230HT01 model product information product information note (2) definition of test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point of the panel note (4) definition of 9 points brightness uniform ity note (5) definition of response time : sum of tr, t f buni b b b = - 100 ( max min) max bmax : maximum brightness bmin : minimum brightness cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black 100% 90% 10% 0% optical instruments response display data white(tft off) black(tft on) white(tft off) 6 8 7 9 3 2 1 4 5 512 1024 1536 288 576 864 active area : test point free datasheet http:///
9/35 page LTM230HT01 model product information product information note (6) definition of luminance of white : luminan ce of white at center point note (7) definition of color chromaticity (cie 1931 , cie1976) color coordinate of red, green, blue & white at cent er point note (8) definition of viewing angle : viewing angle range (cr 10) free datasheet http:///
10/35 page LTM230HT01 model product information product information note (9) color grayscale linearity a. test image : 100% full white pattern with a test pattern as below b. test pattern : squares, 40mm by 40mm in size, fi lled with 255, 225, 195, 165, 135 and 105 grays steps should be arranged at the center of the screen. c. test method -1 st gray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u and v coordinate s. - next gray step : move a 225 gray square into the c enter and measure both luminance and coordinates, too. d. test evaluation where a, b : 2 gray levels found to have the larges t color differences between them i.e. get the largest u and v of each 6 pair of u and v and calculate the uv. d u' v' = (u' - u' ) + (v' - v' ) a b 2 a b 2 free datasheet http:///
11/35 page LTM230HT01 model product information product information 3.1 tft lcd module the connector for display data & timing signal shoul d be connected. ta = 25 c common mode voltage input voltage range (single-ended) differential input voltage lvds skew differential input voltage for lvds receiver threshold (4) v 2.4 0 v in (4) v 2.4- |v id |/2 1.2 0+ |v id |/2 v cm (4) mv 600 200 |v id | (3) ps 300 -300 t skew (7) a 5.0 - - i rush rush current mhz tbd 69.3 (56.3) f dclk main frequency khz tbd 66.6 (54.1) f h hsync frequency hz (75) 60 (49) f v vsync frequency ma tbd (1,800) - (c) dot ma - (1,100) - (b) white (5),(6) ma - (1,600) - i dd (a) black current of power supply mv - - -100 low (2) mv +100 - - high lvds input characteri stics (1) v 5.5 5.0 4.5 v dd voltage of power supply note unit max. typ. min. symbol item note (1) the ripple voltage should be controlled un der 10% of v dd . 3. electrical characteristics free datasheet http:///
12/35 page LTM230HT01 model product information product information (2) differential receiver voltage definitions and propa gation delay and transition time test circuit a. all input pulses have frequency = 10mhz, t r or t f =1ns b. c l includes all probe and fixture capacitance note a. note b. (4) definition of v id and v cm using single-end signals (3) lvds receiver dc parameters are measured under static and steady conditions which may not be reflective of its performance in t he end application. where tskew : skew between lvds clock & lvds data, t : 1 period time of lvds clock cf) (-/+) of 300psec means lvds data goes before or after lvds clock. differential lvds data rx +/- t skew t v diff = 0v v diff = 0v differential lvds clk free datasheet http:///
13/35 page LTM230HT01 model product information product information (5) fv=60hz, fdclk = 69.3 mhz, vdd = 5.0v, dc current . (6) power dissipation check pattern (lcd module onl y) rush current i rush can be measured when t rush . is 470 ? . t rush =470 ? 100% gnd 90% 10% v dd (7) measurement condition a) black pattern b) white pattern c) dot pattern free datasheet http:///
14/35 page LTM230HT01 model product information product information the back light unit is an edge - lighting type with 2 dual ccfts ( cold cathode fluorescent tube ) the characteristics of two dual lamps are shown in the following tables. ta=25 2 c 25 : (1,450) (5) vrms 0 : (1,800) - - vs startup voltage 1.5554 1.414 1.2726 wdis distortion rate (4) % 10 - - wasy asymmetry rate inverter waveform (3) hour - - (50,000) hr operating life time (2) khz (800 - (40) f l lamp frequency vrms - (850) - v l lamp voltage (1) marms (8.0) (7.5) (4.0) i l lamp current note unit max. typ. min. symbol item note (1) specified values are for a single lamp. lamp current is measured with current meter for hig h frequency as shown below. refer to the following block diagram of the back li ght unit for more information. fig. measurement point of lamp current 3.2 back light unit hot(red) cold(white) hot(blue) cold(gray) i 1 i 2 i 3 i 4 inverter (si1700) hot(red) cold(white) hot(blue) cold(gray) a a a a lcd module free datasheet http:///
15/35 page LTM230HT01 model product information product information (2) lamp frequency which may produce interference w ith horizontal synchronous frequency may cause line flow on the display. theref ore lamp frequency should be detached from the horizontal synchronous frequency a nd its harmonics as far as possible in order to avoid interference. (3) life time (hr) is defined as the time when brig htness of a lamp unit itself becomes 50% or less than its original value at the conditio n of ta = 25 2 c and i l = 7.5marms (4) designing a system inverter intended to have bet ter display performance, power efficiency and lamp reliability. they would help increase the lamp lifetime and redu ce leakage current. a. the measurement should be done at typical lamp c urrent. b. the asymmetry rate of the inverter waveform shou ld be less than 10%. c. the distortion rate of the waveform should be 2 with 10% tolerance. - inverter output waveform had better be more simila r to ideal sine wave. | | i i i rms p - p - 100 asymmetry rate distortion rate (5) if an inverter has shutdown function, it should keep its output for over 1 second even if the lamp connector is open. otherwise the la mps may not be turned on. fig. wave form of the inverter | | i i rms p | | i i rms - p or i p i -p free datasheet http:///
16/35 page LTM230HT01 model product information product information 4. block diagram 4.2 back light unit 4.1 tft lcd module connector : yeon-ho 35001hs-04l hot(red) cold(white) hot(blue) cold(gray) hot(red) cold(white) hot(blue) cold(gray) power circuit column driver circuit tft-lcd (1920 x rgb x 1080 pixels) s1 s 1920 timing controller source driver ics lvds (rx) lvds(tx) rsds(tx) control signal rsds cn1 (30pin) lvds pair #1 lvds pair #2 +5.0v v dd control signal lamp(ccfl) lamp(ccfl) lamp(ccfl) lamp(ccfl) 12 34 lamp(ccfl) lamp(ccfl) lamp(ccfl) lamp(ccfl) 12 34 free datasheet http:///
17/35 page LTM230HT01 model product information product information 5.1. input signal & power ( connector : uju is100-l3 0o-c23 or compatible ) * if the system already uses the 25, 26pins, it sho uld keep under gnd level the voltage applied to those pins should not exceed -200mv. 5. input terminal pin assignment power supply : +5v negative lvds differential data output positive lvds differential data output vdd 30 vdd 29 vdd 28 no connection nc 27 * ctl (for lcd internal use only. do not connect) nc 26 * ce (for lcd internal use only. do not connect) nc 25 ground gnd 24 positive lvds differential data output rxe3p 23 negative lvds differential data output rxe3n 22 positive sampling clock (even data) rxec+ 21 negative sampling clock (even data) rxec- 20 positive lvds differential data output rxe2p 19 negative lvds differential data output rxe2n 18 ground gnd 17 positive lvds differential data output rxe1p 16 negative lvds differential data output rxe1n 15 ground gnd 14 positive lvds differential data output rxe0p 13 negative lvds differential data output rxe0n 12 positive lvds differential data output rxo3p 11 negative lvds differential data output rxo3n 10 positive sampling clock (odd data) rxoc+ 9 negative sampling clock (odd data) rxoc- 8 ground gnd 7 positive lvds differential data output rxo2p 6 negative lvds differential data output rxo2n 5 positive lvds differential data output rxo1p 4 rxo1n 3 rxo0p 2 negative lvds differential data output rxo0n 1 function symbol pin no free datasheet http:///
18/35 page LTM230HT01 model product information product information note) pin number starts from left side pin no. 1 pin no. 30 pcb a. all gnd pins should be connected together and a lso be connected to the lcds metal chassis. b. all power input pins should be connected togethe r. c. all nc pins should be separated from other signa l or power. fig. connector diagram uju is100-l30o-c23 or compatible #30 #1 #30 #1 free datasheet http:///
19/35 page LTM230HT01 model product information product information 5.2 lvds interface (1) 5.2.1 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data ro6 txin27 50 blue odd pixel data bo5 txin22 24 blue odd pixel data bo4 txin21 23 blue odd pixel data bo3 txin20 22 rxo2- rxo2+ no. 5 no. 6 txout2- txout2+ blue odd pixel data bo2 txin19 20 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ blue odd pixel data bo1 txin18 19 blue odd pixel data (msb) bo7 txin17 18 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ blue odd pixel data bo6 txin16 16 blue odd pixel data (lsb) bo0 txin15 15 green odd pixel data go5 txin14 14 green odd pixel data go4 txin13 12 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go3 txin12 11 green odd pixel data (msb) go7 txin11 10 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ green odd pixel data go6 txin10 8 green odd pixel data go2 txin9 7 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go1 txin8 6 green odd pixel data (lsb) go0 txin7 4 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data ro5 txin6 3 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data (msb) ro7 txin5 2 red odd pixel data ro4 txin4 56 red odd pixel data ro3 txin3 55 red odd pixel data ro2 txin2 54 red odd pixel data ro1 txin1 52 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data (lsb) ro0 txin0 51 symbol terminal function symbol symbol no to ltm230tt01 interface ( cn101 ) output signal device input signal device input pin lvds transmitter ( ds90c383, ds90c385 ) signal interface free datasheet http:///
20/35 page LTM230HT01 model product information product information 5.2.2 even pixel data (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data re6 txin27 50 blue even pixel data be5 txin22 24 blue even pixel data be4 txin21 23 blue even pixel data be3 txin20 22 rxe2- rxe2+ no. 18 no. 19 txout2- txout2+ blue even pixel data be2 txin19 20 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ blue even pixel data be1 txin18 19 blue even pixel data (msb) be7 txin17 18 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ blue even pixel data be6 txin16 16 blue even pixel data (lsb) be0 txin15 15 green even pixel data ge5 txin14 14 green even pixel data ge4 txin13 12 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge3 txin12 11 green even pixel data (msb) ge7 txin11 10 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ green even pixel data ge6 txin10 8 green even pixel data ge2 txin9 7 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge1 txin8 6 green even pixel data (lsb) ge0 txin7 4 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data re5 txin6 3 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data (msb) re7 txin5 2 red even pixel data re4 txin4 56 red even pixel data re3 txin3 55 red even pixel data re2 txin2 54 red even pixel data re1 txin1 52 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data (lsb) re0 txin0 51 symbol terminal function symbol symbol no to ltm230tt01 interface ( cn101 ) output signal device input signal device input pin lvds transmitter ( ds90c383, ds90c385 ) signal interface free datasheet http:///
21/35 page LTM230HT01 model product information product information 5.2 lvds interface (2) 5.2.3 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data ro6 r16 4 blue odd pixel data bo5 b15 87 blue odd pixel data bo4 b14 88 blue odd pixel data bo3 b13 89 rxo2- rxo2+ no. 5 no. 6 a2m a2p blue odd pixel data bo2 b12 90 rxo1- rxo1+ no. 3 no. 4 a1m a1p blue odd pixel data bo1 b11 91 blue odd pixel data (msb) bo7 b17 85 rxo3- rxo3+ no. 10 no. 11 a3m a3p blue odd pixel data bo6 b16 86 blue odd pixel data (lsb) bo0 b10 92 green odd pixel data go5 g15 95 green odd pixel data go4 g14 96 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go3 g13 99 green odd pixel data (msb) go7 g17 93 rxo3- rxo3+ no. 10 no. 11 a3m a3p green odd pixel data go6 g16 94 green odd pixel data go2 g12 100 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go1 g11 1 green odd pixel data (lsb) go0 g10 2 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data ro5 r15 5 rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data (msb) ro7 r17 3 red odd pixel data ro4 r14 6 red odd pixel data ro3 r13 7 red odd pixel data ro2 r12 8 red odd pixel data ro1 r11 9 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data (lsb) ro0 r10 10 symbol terminal function symbol symbol no to ltm230tt01 interface ( cn101 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface free datasheet http:///
22/35 page LTM230HT01 model product information product information 5.2.4 even pixel data (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data re6 r26 76 blue even pixel data be5 b25 59 blue even pixel data be4 b24 60 blue even pixel data be3 b23 61 rxe2- rxe2+ no. 18 no. 19 a6m a6p blue even pixel data be2 b22 62 rxe1- rxe1+ no. 15 no. 16 a5m a5p blue even pixel data be1 b21 63 blue even pixel data (msb) be7 b27 57 rxe3- rxe3+ no. 22 no. 23 a7m a7p blue even pixel data be6 b26 58 blue even pixel data (lsb) be0 b20 64 green even pixel data ge5 g25 69 green even pixel data ge4 g24 70 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge3 g23 71 green even pixel data (msb) ge7 g27 65 rxe3- rxe3+ no. 22 no. 23 a7m a7p green even pixel data ge6 g26 66 green even pixel data ge2 g22 72 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge1 g21 73 green even pixel data (lsb) ge0 g20 74 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data re5 r25 77 rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data (msb) re7 r27 75 red even pixel data re4 r24 78 red even pixel data re3 r23 79 red even pixel data re2 r22 80 red even pixel data re1 r21 81 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data (lsb) re0 r20 84 symbol terminal function symbol symbol no to ltm230tt01 interface ( cn101 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface free datasheet http:///
23/35 page LTM230HT01 model product information product information 5.2.5 timing diagrams of lvds for transmitting lvds receiver : integrated t-con free datasheet http:///
24/35 page LTM230HT01 model product information product information 5.3 back light unit ground gray cold2 4 ground gray cold2 4 yeon-ho 35001hs-04l connect or part no. high voltage blue hot2 3 - ground white cold1 2 high voltage red hot1 1 lower high voltage blue hot2 3 - ground white cold1 2 high voltage red hot1 1 upper function color input pin no. free datasheet http:///
25/35 page LTM230HT01 model product information product information 5.3 input signals, basic display colors and gray sc ale of each color b255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b254 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b253 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g254 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of green r255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic color b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) color note (1) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gr ay level) input signal : 0 = low level voltage, 1 = high leve l voltage free datasheet http:///
26/35 page LTM230HT01 model product information product information 6.1 timing parameters ( de only mode ) 6. interface timing 2pixel/ clock clocks - 1040 - t h horizontal total 2pixel/ clock clocks - 960 - t hd active display period horizontal display term - lines tbd 1111 (1105) t v vertical total - lines - 1080 - t vd active display period vertical display term - hz (75) 60 (49) f v vsync - khz tbd 66.6 (54.1) f h hsync - mhz tbd 69.3 (56.3) 1/t c frequency clock note unit max. typ. min. symbol item signal note (1) this product is de only mode. the input o f hsync & vsync signal does not have an effect on normal operation. (2) test point : ttl control signal and clk at lvds tx input terminal in system (3) internal vcc = 3.3v (4) best operation clock frequency is 69.3 mhz (60hz) (5) clock frequency = frame frequency x t v (typ) x t h (typ) (6) max, min variation range is at main clock typ va lue ( 69.3 mhz). free datasheet http:///
27/35 page LTM230HT01 model product information product information 6.2 timing diagrams of interface signal ( de only m ode ) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc free datasheet http:///
28/35 page LTM230HT01 model product information product information 6.3 power on/off sequence to prevent a latch-up or dc operation of the lcd mo dule, the power on/off sequence should be as the diagram below. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid data to b/l enable at powe r on. t6 : the time from valid data off to b/l disable at power off. the supply voltage of the external system for the m odule input should be the same as the definition of v dd . apply the lamp voltage within the lcd operation ran ge. when the back light turns on before the lcd operation or the lcd turns off befor e the back light turns off, the display may momentarily show abnormal screen. in case of v dd = off level, please keep the level of input signals low or keep a high impedance. t4 should be measured after the module has been ful ly discharged between power off and on period. interface signal should not be kept at high impedan ce when the power is on. 300 ? ?? ? ? t1 ? 10msec 0 ? t2 ? 50msec 0 ? t3 ? 50msec 1sec ? t4 back-light (recommended) 500msec ? t5 100msec ? t6 free datasheet http:///
29/35 page LTM230HT01 model product information product information 6.4 vdd power dip condition note (1) the above conditions are for the glitch of the input voltage. (2) for stable operation of an lcd module power, pl ease follow them. i.e., if typ vdd x 80% vcc typ vdd x 90%, then t d should be less than 20ms. t d v cc v dd gnd 90% 80% 4.5v v dd 5.5v if v dd (typ.) x 80% v cc v dd (typ) x 90% then, 0

30/35 page LTM230HT01 model product information product information 7. outline dimension [ refer to the next page ] free datasheet http:///
free datasheet http:///
free datasheet http:///
33/35 page LTM230HT01 model product information product information (a) when the module is assembled, it should be atta ched to the system firmly using all mounting holes. be careful not to twist a nd bend the module. (b) because the inverter uses high voltages, it sho uld be disconnected from power source before it is assembled or disassembled. (c) refrain from strong mechanical shock and / or a ny force to the module. in addition to damage, it may cause improper operat ion or damage to the module and ccft back light. (d) note that polarizer films are very fragile and could be damaged easily. do not press or scratch the surface harder than a h b pencil lead. (e) wipe off water droplets or oil immediately. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) desirable cleaners are water, ipa (isopropyl al cohol) or hexane. do not use ketone type materials (ex. acetone), ethy l alcohol, toluene, ethyl acid or methyl chloride. it might cause permanent damage to the polarizer due to chemical reaction. (h) if the liquid crystal material leaks from the p anel, it should be kept away from the eyes or mouth . in case of contact with ha nds, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gat e array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the module sho uld be slowly peeled off just before use so that the electrostatic charge can be minimized. (o) pins of i/f connector should not be touched dir ectly with bare hands. 8. general precautions 8.1 handling free datasheet http:///
34/35 page LTM230HT01 model product information product information 8.2 storage (a) do not leave the module in high temperature, an d high humidity for a long time. it is highly recommended to store the module with t emperature from 0 to 35 and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunli ght. (c) the module should be stored in a dark place. it is prohibited to apply sunlight or fluorescent light in storing. 8.3 operation (a) do not connect or disconnect the module in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequency circuits. sufficient suppression to the electromagnetic interference should be done by system manufacturers . grounding and shielding methods may be important to minimize the interferen ce. (d) the cable between the back light connector and its inverter power supply should be connected directly with a minimized length. a lo nger cable between the back light and the inverter may cause lower lum inance of lamp(ccft) and may require higher startup voltage(vs). 8.4 operation condition guide (a) the lcd product should be operated under normal conditions. normal condition is defined as below; - temperature : 20 15 - humidity : 65 20% - display pattern : continually changing pattern (no t stationary) (b) if the product will be used in extreme conditio ns such as high temperature, humidity, display patterns or operation time etc.., it is strongly recommended to contact sec for application engineering advice. otherwise, its reliability and function may not be guaranteed. extreme conditions are commonly found at airports, transit stations, banks, stock market, an d controlling systems. free datasheet http:///
35/35 page LTM230HT01 model product information product information 8.5 others (a) ultra-violet ray filter is necessary for outdoo r operation. (b) avoid condensation of water. it may result in i mproper operation or disconnection of electrode. (c) do not exceed the absolute maximum rating value . ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pcb's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. free datasheet http:///

▲Up To Search▲

Price & Availability of LTM230HT01

	To Download LTM230HT01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .